Pulse sensors: additional commissioning (only if advised by Sensorfact)

In very specific cases, additional commissioning will be needed. If so, Sensorfact will let you know within the connection advice. If nothing is mentioned about this, you can fully neglect this paragraph and should not follow below actions.

Change DIP switches in case of high frequency

The DIP settings should change as below when the pulse Frequency is higher than 1 Hertz. After changing the settings, press the learn button while battery is inserted. Subsequently, the LED right from the learn button should blink as confirmation.

(MF) pulse frequency 1 Hz to 6 Hz


(HF) pulse frequency 6Hz to 12 Hz


Press ‘learn’ button after changes

Log in to our Software >
Gain real time insights.
Contact Customer Success >
Ask for support.
Go to our webshop >
Order additional hardware.